Analysis Of Wood Plastic Composite Materials And Wood

By Seven Trust |

Lost losses for wood plastic materials

Wood plastic is a profile that can produce materials that meet the length of customers according to customer needs. The length of the wood is fixed, and the cutting processing causes a lot of waste.

In the same situation, wood plastic needs less compared to wood

Generally, the outdoor floor is installed. When the wood is selected, it requires about 45mm thick wood. And wooden plastic only requires 25mm thick materials, and its strength is more than 45mm of anticorrosive wood. By conversion, if the wood is 1 cubic meter, the wooden plastic only needs about 0.5 cubic meters.Wood plastic is a kind of profile. There are many hollow specifications, saving a lot of materials, wood plastic can be hollow, and wood is impossible.


Good physical properties of wood plastic, strong mechanical performance, strong and durable

Wood plastic is suitable for large -scale installation and use of outdoor, waterproof and moisture, and it is not easy to crack and rot. Wood is prone to cracking mold and rotting outdoors outdoors, short service life, and easy to cause safety accidents.

The surface of wood plastic does not need to be painted

Generally, wood needs to be treated with surface paint or water -based coating. In other words, wood plastic is convenient in construction.


Wood plastic products can be avoided, low maintenance costs

Wood generally needs to be maintained or painted with paint. In the long run, the maintenance cost of wooden plastic is far from wooden products.The service life of plastic wood can generally reach 3-4 times that of ordinary wood. The testing data from foreign authoritative institutions shows that the use of wooden plastic use is far more than 10 years, which can reach 50 years, and the use cycle is long.


verification code