Storage And Maintenance Of Plastic Wood Profiles

By Seven Trust |

To understand how plastic wood is stored and the maintenance of plastic wood, you need to understand some of the characteristics of plastic wood: Because plastic wood is wrapped in a layer of plastic layer around natural fiber such as wood fibers, the water absorption rate of plastic wood is very low. It is very suitable for the waterfront landscape. Compared with general wood, plastic wood is much larger than that of 1.1 to 1.18, while the proportion of general wood is 0.4 ~ 0.7. Even the large -scale hardwood is only about 1.0. Therefore, plastic wood is much heavier at the same volume. In order to reduce the weight of plastic wood products, it can be used for foaming, changing the shape of the type of material, and design structure.

Storage And Maintenance Of Plastic Wood Profiles

Plastic wood storage method

By heating plastic wood, you can bend. And plastic wood can be curved to a certain degree in amount. Therefore, when storage for a long time, pay attention to placing it on a flat ground to prevent deformation.

Storage And Maintenance Of Plastic Wood Profiles

Maintenance and maintenance of plastic wood

In view of the advantages of plastic wood, even if it is blowing the sun in the outdoor wind, plastic wood will not rot, crack or crack. In addition, it has the ability to resist ultraviolet rays. Therefore, plastic wood does not require special maintenance. This makes the management of plastic wood products easily easily.


verification code